Product Details:
| Packaging Type | Tin Can |
| Brand | BSC Paints |
| Color | All Shades |
| Packaging Size | 20 ltr |
| Material | Polyurethane based |
All finishes available-Marble,Opaque,Metallic,Matt,Glossy,Stencil(all shades)
A two pack polyamide cured, epoxy anticorrosive primer containing Zinc phosphate pigment. The red
version contains red oxide of iron apart from zinc phosphate. The primer gives excellent adhesion to
steel. It is compatible with a wide range of topcoats and thus forms highly efficient protective schemes
for corrosive, coastal and chemical environments.
Product Information
Uses
Application Details
As primer for marine and chemical environment as in: Pulp and paper mills, Refineries, Petrochemicals, Fertilizer units,
Metal and Engineering industries.
Steel Surfaces:
Degrease and blast clean to Sa 2½ grade minimum
of Swedish specification SIS - 05 -5900 - 1967. If
blast cleaning is not practical make full use of
mechanical tools along with manual cleaning and
wire brushing to remove loose rust / scale to St 2
or St 3 grade of Swedish specification. Surface
should be perfectly clean and dry before applying
BSC Zinc Phosphate Primer.
Method of Application:
Brush / Roller / Spray
Notes on Airless Spray:Tip
Range : 15 - 21 thou. Total out put
Fluid pressure 2500 – 3000 psi.
(176 – 210 kg/sq.cm.)
Pot life: 4 - 8 hours.
14.0 – 8.4 Sq. metre per litre
Upto 150o
C (Intermittent)
Surface dry 2 - 3 hours.
Handleable 6 - 8 hours
Full cure - 7 days
Upto 12 months so long as the
material is stored in sealed
containers under standard
warehouse storage condition.
